F20 SWPB Yamaha 4 Stroke 20hp Portable Outboard For Sale
$1,715.00 – $2,695.00
F25LMHC Yamaha 4 Stroke 25hp Portable Outboard For Sale
Pre Owned Yamaha 85 A Outboard engine 2 stroke
| Engine Type | In-line 3 |
|---|---|
| Displacement [cm3] | 1140 |
| Bore x Stroke [mm] | 82.0 x 72.0 |
| Max. Prop Shaft Output [kW (ps)] @r/min | 62.5 (85) @5000 |
| Fuel Induction System | Carburetor |
| Engine Transom Height[mm (inch)] | L: 521 (20.5), Y: 572 (22.5), X: 647 (25.5) (*depending on model) |
| Dry Weight [kg] * | 113-124 |
| Starting System | Electric Starter |
| Controls | Remote Control or Tiller Handle (*depending on model) |
| Tilt System | Power Trim & Tilt or Hydro Tilt (*depending on model) |
| Lubrication System | Pre-mixed Fuel and Oil |
Twin 2006 Yamaha 250 Hp 4 Stroke 25″ Outboard Motors
Pair of 2006 YAMAHA F/LF250TXR, 25″ SHAFT, FULLY SERVICED
ENGINE HOURS: 457/458 HOURS
F250TXR
0000-1000 r/min 274.4
1000-2000 r/min 72.6 2000-3000 r/min 16.7
3000-4000 r/min 95.3
4000-5000 r/min 66.3
5000-6000 r/min 1.9 6000-7000 r/min 0.0
LF250TXR
0000 1000 r/min 268.4
1000-2000 r/min 79.9
2000-3000 r/min 19.2 3000-4000 r/min 92.5
4000-5000 r/min 66.3 5000-6000 r/min 2.5
6000-7000 r/min 0.0
Compression 180-190psi all cylinders
-25″ Shafts / Power Tilt & Trim
-Counter Rotation
-Exhaust Updated
Fuel Injected/4 Stroke / Very Fuel Efficient
Engines run perfectly / Cosmetically in Excellent condition Motors have been Fully Serviced and Water Tested – Fuel
Systems thoroughly cleaned, New Filters, Injectors serviced & Flow-Tested, Tilt & Trim serviced and re-sealed, New Spark Plugs, New Zincs. Lower unit has been re-sealed and has new water pump and gear oil.
Prop & Controls included.
YAMAHA 85AETL outboard for sale
Yamaha F115 I-4 1.8L Mechanical 20 Outboard Motor
$5,180.00 – $10,360.00Convenience & Control
- EXTENDED ENGINE LIFE: A Freshwater Flush Device allows you to flush the engine without starting it, for maximum convenience, durability and engine life.
- MULTI-FUNCTION TILLER HANDLE: The F115 is compatible with Yamaha’s award winning Multi-Function Tiller Handle. It incorporates engine start/stop, emergency stop, gear shift, power trim and tilt operation, variable trolling switch, warning and controls all in one.
- CHARGING POWER: The F115 features three-phase alternators that produce up to 35 amps of power. For the 115, it’s more than 45 percent more charging power. That’s plenty of electrical power for battery charging and accessories, with more to spare.
- VARIABLE TROLLING: The F115 features Yamaha’s Variable Trolling RPM Switch (VTS®). This allows for precision adjustment of trolling speeds in 50-RPM increments, from 650 to 900 RPM for the 115 hp, and 550 to 1000 RPM for the 90 and 75 hp. It even allows for sub-idle trolling. This is a major plus for anglers.
Power & Performance
- POWER AND EFFICIENCY: Precision Multi-Point Electronic Fuel Injection delivers the exact amount of fuel needed for optimum performance and efficiency. Yamaha’s EFI optimizes fuel atomization further enhancing fuel economy.
- POWERFUL HOLE SHOT: The Composite Intake Manifold on the F115, F90 and F75 feature long tube intake tracks, tuned to increase airflow, which boost low-end and midrange torque. This means a more powerful hole shot and increased acceleration. Even with all this responsive power, an air silencer box and surge tank reduce air intake noise and air turbulence for smooth, quiet operation.
- OPTIMUM PERFORMANCE: A TCI microcomputer ignition adjusts timing to maintain optimal engine performance, economy and power under all operating conditions.
- LIGHTWEIGHT, COMPACT DESIGN: To keep weight down and efficiency up, the F115 has a double overhead camshaft, and the F90 and F75 feature a single overhead camshaft, but still deploy four valves per cylinder. That setup means less mass in the cylinder head and reduced weight for the overall outboard. At the same time, four valves per cylinder means great engine combustion, which contributes to horsepower, torque and fuel efficiency.
- QUICK ACCELERATION: The F90 and F75 have stepped up to 1.8-liter displacement, joining their F115 big bro. Meanwhile the 90 hp and 75 hp have both dropped 13 pounds. Lighter weight and increased volumetric efficiency, plus increased displacement equals thrilling performance and make our 90 hp a top performer in acceleration and torque.
Reliability & Durability
- KEEP THE WATER OUT: Updated cowling design incorporates the latest Water Draining Intake Duct. With side intakes and superior water separation function, this outboard is even better suited to take on the marine environment.
- MEASURABLY QUIETER THAN PREDECESSOR: Yamaha’s proven labyrinth exhaust system, which gradually expands exhaust gases through a labyrinth, greatly suppresses engine noise at low to medium speeds. Updates to the muffler have greatly reduced noise at higher than midrange speeds.
- ENGINE WARNING SYSTEM: This system protects the outboard with a range of functions including: overheat protection and low-oil-pressure warning (automatically reducing maximum RPM to 2000), over-rev protection, water-in-fuel detection, start-in-gear protection and shift-in prevention at open throttle.
- WET SUMP: The F115, F90 and F75 use a pressurized oil delivery system and incorporates a compact and durable oil pump to keep all of the moving parts of their DOHC and SOHC systems lubricated and running smoothly for maximum reliability.
- CORROSION PROTECTION: Combined with our proprietary alloy (YDC-30), our highly vaunted, anti-corrosive paint system provides a tough, five-layer barrier against corrosion. Stainless Steel components such as the drive, prop and shift shafts provide an additional layer of critical corrosion protection. And multiple sacrificial anodes throughout the motor provide protection from the elements.
Yamaha F20 Portable Mechanical ES Outboard Motor
General Information
| Manufacturer | Yamaha |
| Model | Yamaha F20 Portable Mechanical ES Outboard Motor |
| Model Code | F20LEA |
| Color | Grey |
Electrical
| Alternator Output | 16 amp |
Engine
| Engine Type | 2 cylinder |
| Ignition | CDI Microcomputer |
| Starting | Electric |
| Exhaust | Through propeller |
Measurements
| Power | 25 Horsepower |
| Displacement | 432 Cubic Centimeter |
| Bore x Stroke | 65 x 65.1 mm (2.56 x 2.56 in) |
| Shaft Length | 20″ |
| Dry Weight | 141 lbs |
Operational
| Steering | Remote mechanical controls |
| Fuel Type | Unleaded |
| Use | Fresh and Salt Water |
| Full Throttle RPM Range | 5,000 – 6,000 rpm |
| Fuel Induction | EFI |
| Lubrication | Wet sump Recommended oil – Yamalube® 4M Oil capacity with filter – 1.1 l Oil capacity without filter – 1.0 l |
| Cooling | Thermostatic control |
| Gear Ratio | 2.00:1 |
| Gear Shift | Forward, neutral, reverse |
| Trim System | Power trim and tilt -3° through +16° Degree of tilt – 63° |
| Propeller | Aluminum |
Other
| Warranty | 3 Year Limited Pleasure, 1 Year Limited Commercial |
Yamaha F20 Portable Mechanical ES PT Outboard Motor
General Information
| Manufacturer | Yamaha |
| Model | Yamaha F20 Portable Mechanical ES PT Outboard Motor |
| Model Code | F20LPA |
| Color | Grey |
Electrical
| Alternator Output | 16 amp |
Engine
| Engine Type | 2 cylinder |
| Ignition | CDI Microcomputer |
| Starting | Electric |
| Exhaust | Through propeller |
Measurements
| Power | 25 Horsepower |
| Displacement | 432 Cubic Centimeter |
| Bore x Stroke | 65 x 65.1 mm (2.56 x 2.56 in) |
| Shaft Length | 20″ |
| Dry Weight | 141 lbs |
Operational
| Steering | Remote mechanical controls |
| Fuel Type | Unleaded |
| Use | Fresh and Salt Water |
| Full Throttle RPM Range | 5,000 – 6,000 rpm |
| Fuel Induction | EFI |
| Lubrication | Wet sump Recommended oil – Yamalube® 4M Oil capacity with filter – 1.1 l Oil capacity without filter – 1.0 l |
| Cooling | Thermostatic control |
| Gear Ratio | 2.00:1 |
| Gear Shift | Forward, neutral, reverse |
| Trim System | Power trim and tilt -3° through +16° Degree of tilt – 63° |
| Propeller | Aluminum |
Other
| Warranty | 3 Year Limited Pleasure, 1 Year Limited Commercial |
Yamaha F20 Portable Tiller ES Outboard Motor
General Information
| Manufacturer | Yamaha |
| Model | Yamaha F20 Portable Tiller ES Outboard Motor |
| Model Code | F25LC |
| Color | Grey |
Electrical
| Alternator Output | 16 amp |
Engine
| Engine Type | 2 cylinder |
| Ignition | CDI Microcomputer |
| Starting | Electric |
| Exhaust | Through propeller |
Measurements
| Power | 25 Horsepower |
| Displacement | 432 Cubic Centimeter |
| Bore x Stroke | 65 x 65.1 mm (2.56 x 2.56 in) |
| Shaft Length | 20″ |
| Dry Weight | 141 lbs |
Operational
| Steering | Remote mechanical controls |
| Fuel Type | Unleaded |
| Use | Fresh and Salt Water |
| Full Throttle RPM Range | 5,000 – 6,000 rpm |
| Fuel Induction | EFI |
| Lubrication | Wet sump Recommended oil – Yamalube® 4M Oil capacity with filter – 1.1 l Oil capacity without filter – 1.0 l |
| Cooling | Thermostatic control |
| Gear Ratio | 2.00:1 |
| Gear Shift | Forward, neutral, reverse |
| Trim System | Power trim and tilt -3° through +16° Degree of tilt – 63° |
| Propeller | Aluminum |
Other
| Warranty | 3 Year Limited Pleasure, 1 Year Limited Commercial |
Yamaha F20 Portable Tiller ES PT Outboard Motor
General Information
| Manufacturer | Yamaha |
| Model | Yamaha F20 Portable Tiller ES PT Outboard Motor |
| Model Code | F25LC |
| Color | Grey |
Electrical
| Alternator Output | 16 amp |
Engine
| Engine Type | 2 cylinder |
| Ignition | CDI Microcomputer |
| Starting | Electric |
| Exhaust | Through propeller |
Measurements
| Power | 25 Horsepower |
| Displacement | 432 Cubic Centimeter |
| Bore x Stroke | 65 x 65.1 mm (2.56 x 2.56 in) |
| Shaft Length | 20″ |
| Dry Weight | 141 lbs |
Operational
| Steering | Remote mechanical controls |
| Fuel Type | Unleaded |
| Use | Fresh and Salt Water |
| Full Throttle RPM Range | 5,000 – 6,000 rpm |
| Fuel Induction | EFI |
| Lubrication | Wet sump Recommended oil – Yamalube® 4M Oil capacity with filter – 1.1 l Oil capacity without filter – 1.0 l |
| Cooling | Thermostatic control |
| Gear Ratio | 2.00:1 |
| Gear Shift | Forward, neutral, reverse |
| Trim System | Power trim and tilt -3° through +16° Degree of tilt – 63° |
| Propeller | Aluminum |
Other
| Warranty | 3 Year Limited Pleasure, 1 Year Limited Commercial |
Yamaha F25 Portable Mechanical ES Outboard Motor
General Information
| Manufacturer | Yamaha |
| Model | F25 Portable Mechanical ES PT |
| Model Code | F25LC |
| Color | Grey |
Electrical
| Alternator Output | 16 amp |
Engine
| Engine Type | 2 cylinder |
| Ignition | CDI Microcomputer |
| Starting | Electric |
| Exhaust | Through propeller |
Measurements
| Power | 25 Horsepower |
| Displacement | 432 Cubic Centimeter |
| Bore x Stroke | 65 x 65.1 mm (2.56 x 2.56 in) |
| Shaft Length | 20″ |
| Dry Weight | 141 lbs |
Operational
| Steering | Remote mechanical controls |
| Fuel Type | Unleaded |
| Use | Fresh and Salt Water |
| Full Throttle RPM Range | 5,000 – 6,000 rpm |
| Fuel Induction | EFI |
| Lubrication | Wet sump Recommended oil – Yamalube® 4M Oil capacity with filter – 1.1 l Oil capacity without filter – 1.0 l |
| Cooling | Thermostatic control |
| Gear Ratio | 2.00:1 |
| Gear Shift | Forward, neutral, reverse |
| Trim System | Power trim and tilt -3° through +16° Degree of tilt – 63° |
| Propeller | Aluminum |
Other
| Warranty | 3 Year Limited Pleasure, 1 Year Limited Commercial |
Yamaha F25 Portable Mechanical ES PT Outboard Motor
General Information
| Manufacturer | Yamaha |
| Model | F25 Portable Mechanical ES PT |
| Model Code | F25LC |
| Color | Grey |
Electrical
| Alternator Output | 16 amp |
Engine
| Engine Type | 2 cylinder |
| Ignition | CDI Microcomputer |
| Starting | Electric |
| Exhaust | Through propeller |
Measurements
| Power | 25 Horsepower |
| Displacement | 432 Cubic Centimeter |
| Bore x Stroke | 65 x 65.1 mm (2.56 x 2.56 in) |
| Shaft Length | 20″ |
| Dry Weight | 141 lbs |
Operational
| Steering | Remote mechanical controls |
| Fuel Type | Unleaded |
| Use | Fresh and Salt Water |
| Full Throttle RPM Range | 5,000 – 6,000 rpm |
| Fuel Induction | EFI |
| Lubrication | Wet sump Recommended oil – Yamalube® 4M Oil capacity with filter – 1.1 l Oil capacity without filter – 1.0 l |
| Cooling | Thermostatic control |
| Gear Ratio | 2.00:1 |
| Gear Shift | Forward, neutral, reverse |
| Trim System | Power trim and tilt -3° through +16° Degree of tilt – 63° |
| Propeller | Aluminum |
Other
| Warranty | 3 Year Limited Pleasure, 1 Year Limited Commercial |
Yamaha F30 Midrange Mechanical 20 Outboard Motor
General Information
| Manufacturer | Yamaha |
| Model | Yamaha F30 Midrange Mechanical 20 Outboard Motor |
| Model Code | Yamaha F30 Midrange Mechanical 20 |
| Color | Grey |
Electrical
| Alternator Output | 16 amp |
Engine
| Engine Type | 2 cylinder |
| Ignition | CDI Microcomputer |
| Starting | Electric |
| Exhaust | Through propeller |
Measurements
| Power | 25 Horsepower |
| Displacement | 432 Cubic Centimeter |
| Bore x Stroke | 65 x 65.1 mm (2.56 x 2.56 in) |
| Shaft Length | 20″ |
| Dry Weight | 141 lbs |
Operational
| Steering | Remote mechanical controls |
| Fuel Type | Unleaded |
| Use | Fresh and Salt Water |
| Full Throttle RPM Range | 5,000 – 6,000 rpm |
| Fuel Induction | EFI |
| Lubrication | Wet sump Recommended oil – Yamalube® 4M Oil capacity with filter – 1.1 l Oil capacity without filter – 1.0 l |
| Cooling | Thermostatic control |
| Gear Ratio | 2.00:1 |
| Gear Shift | Forward, neutral, reverse |
| Trim System | Power trim and tilt -3° through +16° Degree of tilt – 63° |
| Propeller | Aluminum |
Yamaha F30 Midrange Tiller 20 Outboard Motor
General Information
| Manufacturer | Yamaha |
| Model | Yamaha F30 Midrange Tiller 20 Outboard Motor |
| Model Code | Yamaha F30 Midrange Tiller 20 |
| Color | Grey |
Electrical
| Alternator Output | 16 amp |
Engine
| Engine Type | 2 cylinder |
| Ignition | CDI Microcomputer |
| Starting | Electric |
| Exhaust | Through propeller |
Measurements
| Power | 25 Horsepower |
| Displacement | 432 Cubic Centimeter |
| Bore x Stroke | 65 x 65.1 mm (2.56 x 2.56 in) |
| Shaft Length | 20″ |
| Dry Weight | 141 lbs |
Operational
| Steering | Remote mechanical controls |
| Fuel Type | Unleaded |
| Use | Fresh and Salt Water |
| Full Throttle RPM Range | 5,000 – 6,000 rpm |
| Fuel Induction | EFI |
| Lubrication | Wet sump Recommended oil – Yamalube® 4M Oil capacity with filter – 1.1 l Oil capacity without filter – 1.0 l |
| Cooling | Thermostatic control |
| Gear Ratio | 2.00:1 |
| Gear Shift | Forward, neutral, reverse |
| Trim System | Power trim and tilt -3° through +16° Degree of tilt – 63° |
| Propeller | Aluminum |
Other
| Warranty | 3 Year Limited Pleasure, 1 Year Limited Commercial |
Yamaha F40 Midrange Mechanical 20 Outboard Motor
General Information
| Manufacturer | Yamaha |
| Model | Yamaha F40 Midrange Mechanical 20 Outboard Motor |
| Model Code | F40LA |
| Color | Grey |
Electrical
| Alternator Output | 16 amp |
Engine
| Engine Type | 2 cylinder |
| Ignition | CDI Microcomputer |
| Starting | Electric |
| Exhaust | Through propeller |
Measurements
| Power | 25 Horsepower |
| Displacement | 432 Cubic Centimeter |
| Bore x Stroke | 65 x 65.1 mm (2.56 x 2.56 in) |
| Shaft Length | 20″ |
| Dry Weight | 141 lbs |
Operational
| Steering | Remote mechanical controls |
| Fuel Type | Unleaded |
| Use | Fresh and Salt Water |
| Full Throttle RPM Range | 5,000 – 6,000 rpm |
| Fuel Induction | EFI |
| Lubrication | Wet sump Recommended oil – Yamalube® 4M Oil capacity with filter – 1.1 l Oil capacity without filter – 1.0 l |
| Cooling | Thermostatic control |
| Gear Ratio | 2.00:1 |
| Gear Shift | Forward, neutral, reverse |
| Trim System | Power trim and tilt -3° through +16° Degree of tilt – 63° |
| Propeller | Aluminum |
Other
| Warranty | 3 Year Limited Pleasure, 1 Year Limited Commercial |
Yamaha F40 Midrange Tiller 20 Outboard Motor
General Information
| Manufacturer | Yamaha |
| Model | Yamaha F40 Midrange Tiller 20 Outboard Motor |
| Model Code | F40LEHA |
| Color | Grey |
Electrical
| Alternator Output | 16 amp |
Engine
| Engine Type | 2 cylinder |
| Ignition | CDI Microcomputer |
| Starting | Electric |
| Exhaust | Through propeller |
Measurements
| Power | 25 Horsepower |
| Displacement | 432 Cubic Centimeter |
| Bore x Stroke | 65 x 65.1 mm (2.56 x 2.56 in) |
| Shaft Length | 20″ |
| Dry Weight | 141 lbs |
Operational
| Steering | Remote mechanical controls |
| Fuel Type | Unleaded |
| Use | Fresh and Salt Water |
| Full Throttle RPM Range | 5,000 – 6,000 rpm |
| Fuel Induction | EFI |
| Lubrication | Wet sump Recommended oil – Yamalube® 4M Oil capacity with filter – 1.1 l Oil capacity without filter – 1.0 l |
| Cooling | Thermostatic control |
| Gear Ratio | 2.00:1 |
| Gear Shift | Forward, neutral, reverse |
| Trim System | Power trim and tilt -3° through +16° Degree of tilt – 63° |
| Propeller | Aluminum |
Other
| Warranty | 3 Year Limited Pleasure, 1 Year Limited Commercial |
Yamaha F50 Midrange Mechanical 20 Outboard Motor
General Information
| Manufacturer | Yamaha |
| Model | Yamaha F50 Midrange Mechanical 20 Outboard Motor |
| Model Code | F50LB |
| Color | Grey |
Electrical
| Alternator Output | 16 amp |
Engine
| Engine Type | 2 cylinder |
| Ignition | CDI Microcomputer |
| Starting | Electric |
| Exhaust | Through propeller |
Measurements
| Power | 25 Horsepower |
| Displacement | 432 Cubic Centimeter |
| Bore x Stroke | 65 x 65.1 mm (2.56 x 2.56 in) |
| Shaft Length | 20″ |
| Dry Weight | 141 lbs |
Operational
| Steering | Remote mechanical controls |
| Fuel Type | Unleaded |
| Use | Fresh and Salt Water |
| Full Throttle RPM Range | 5,000 – 6,000 rpm |
| Fuel Induction | EFI |
| Lubrication | Wet sump Recommended oil – Yamalube® 4M Oil capacity with filter – 1.1 l Oil capacity without filter – 1.0 l |
| Cooling | Thermostatic control |
| Gear Ratio | 2.00:1 |
| Gear Shift | Forward, neutral, reverse |
| Trim System | Power trim and tilt -3° through +16° Degree of tilt – 63° |
| Propeller | Aluminum |
Other
| Warranty | 3 Year Limited Pleasure, 1 Year Limited Commercial |
Yamaha F60 Midrange Mechanical 20 Outboard Motor
General Information
| Manufacturer | Yamaha |
| Model | Yamaha F60 Midrange Mechanical 20 Outboard Motor |
| Model Code | F60LB |
| Color | Grey |
Electrical
| Alternator Output | 16 amp |
Engine
| Engine Type | 2 cylinder |
| Ignition | CDI Microcomputer |
| Starting | Electric |
| Exhaust | Through propeller |
Measurements
| Power | 25 Horsepower |
| Displacement | 432 Cubic Centimeter |
| Bore x Stroke | 65 x 65.1 mm (2.56 x 2.56 in) |
| Shaft Length | 20″ |
| Dry Weight | 141 lbs |
Operational
| Steering | Remote mechanical controls |
| Fuel Type | Unleaded |
| Use | Fresh and Salt Water |
| Full Throttle RPM Range | 5,000 – 6,000 rpm |
| Fuel Induction | EFI |
| Lubrication | Wet sump Recommended oil – Yamalube® 4M Oil capacity with filter – 1.1 l Oil capacity without filter – 1.0 l |
| Cooling | Thermostatic control |
| Gear Ratio | 2.00:1 |
| Gear Shift | Forward, neutral, reverse |
| Trim System | Power trim and tilt -3° through +16° Degree of tilt – 63° |
| Propeller | Aluminum |
Other
| Warranty | 3 Year Limited Pleasure, 1 Year Limited Commercial |
Yamaha F70 Midrange Mechanical 20 Outboard Motor
General Information
| Manufacturer | Yamaha |
| Model | Yamaha F70 Midrange Mechanical 20 Outboard Motor |
| Model Code | F70LA |
| Color | Grey |
Electrical
| Alternator Output | 16 amp |
Engine
| Engine Type | 2 cylinder |
| Ignition | CDI Microcomputer |
| Starting | Electric |
| Exhaust | Through propeller |
Measurements
| Power | 25 Horsepower |
| Displacement | 432 Cubic Centimeter |
| Bore x Stroke | 65 x 65.1 mm (2.56 x 2.56 in) |
| Shaft Length | 20″ |
| Dry Weight | 141 lbs |
Operational
| Steering | Remote mechanical controls |
| Fuel Type | Unleaded |
| Use | Fresh and Salt Water |
| Full Throttle RPM Range | 5,000 – 6,000 rpm |
| Fuel Induction | EFI |
| Lubrication | Wet sump Recommended oil – Yamalube® 4M Oil capacity with filter – 1.1 l Oil capacity without filter – 1.0 l |
| Cooling | Thermostatic control |
| Gear Ratio | 2.00:1 |
| Gear Shift | Forward, neutral, reverse |
| Trim System | Power trim and tilt -3° through +16° Degree of tilt – 63° |
| Propeller | Aluminum |
Other
| Warranty | 3 Year Limited Pleasure, 1 Year Limited Commercial |
Yamaha F75 Midrange Mechanical 20 Outboard Motor
Convenience & Control
- MULTI-FUNCTION TILLER HANDLE: The F90 is compatible with Yamaha’s award winning Multi-Function Tiller Handle. It incorporates engine start/stop, emergency stop, gear shift, power trim and tilt operation, variable trolling switch, warning and controls all in one.
- CHARGING POWER: The F90 features three-phase alternators that produce up to 35 amps of power. For the 90, that’s 40 percent more output than previous designs. That’s plenty of electrical power for battery charging and accessories, with more to spare.
- VARIABLE TROLLING: The F90 features Yamaha’s Variable Trolling RPM Switch (VTS®). This allows for precision adjustment of trolling speeds in 50-RPM increments, from 650 to 900 RPM for the 115 hp, and 550 to 1000 RPM for the 90 and 75 hp. It even allows for sub-idle trolling. This is a major plus for anglers.
- EXTENDED ENGINE LIFE: A Freshwater Flush Device allows you to flush the engine without starting it, for maximum convenience, durability and engine life.
Power & Performance
- POWER AND EFFICIENCY: Precision Multi-Point Electronic Fuel Injection delivers the exact amount of fuel needed for optimum performance and efficiency. Yamaha’s EFI optimizes fuel atomization further enhancing fuel economy.
- POWERFUL HOLE SHOT: The Composite Intake Manifold on the F115, F90 and F75 feature long tube intake tracks, tuned to increase airflow, which boost low-end and midrange torque. This means a more powerful hole shot and increased acceleration. Even with all this responsive power, an air silencer box and surge tank reduce air intake noise and air turbulence for smooth, quiet operation.
- OPTIMUM PERFORMANCE: A TCI microcomputer ignition adjusts timing to maintain optimal engine performance, economy and power under all operating conditions.
- LIGHTWEIGHT, COMPACT DESIGN: To keep weight down and efficiency up, the F115 has a double overhead camshaft, and the F90 and F75 feature a single overhead camshaft, but still deploy four valves per cylinder. That setup means less mass in the cylinder head and reduced weight for the overall outboard. At the same time, four valves per cylinder means great engine combustion, which contributes to horsepower, torque and fuel efficiency.
- QUICK ACCELERATION: The F90 and F75 have stepped up to 1.8-liter displacement, joining their F115 big bro. Meanwhile the 90 hp and 75 hp have both dropped 13 pounds. Lighter weight and increased volumetric efficiency, plus increased displacement equals thrilling performance and make our 90 hp a top performer in acceleration and torque.
Reliability & Durability
- KEEP THE WATER OUT: Updated cowling design incorporates the latest Water Draining Intake Duct. With side intakes and superior water separation function, this outboard is even better suited to take on the marine environment.
- MEASURABLY QUIETER THAN PREDECESSOR: Yamaha’s proven labyrinth exhaust system, which gradually expands exhaust gases through a labyrinth, greatly suppresses engine noise at low to medium speeds. Updates to the muffler have greatly reduced noise at higher than midrange speeds.
- ENGINE WARNING SYSTEM: This system protects the outboard with a range of functions including: overheat protection and low-oil-pressure warning (automatically reducing maximum RPM to 2000), over-rev protection, water-in-fuel detection, start-in-gear protection and shift-in prevention at open throttle.
- WET SUMP: The F115, F90 and F75 use a pressurized oil delivery system and incorporates a compact and durable oil pump to keep all of the moving parts of their DOHC and SOHC systems lubricated and running smoothly for maximum reliability.
- CORROSION PROTECTION: Combined with our proprietary alloy (YDC-30), our highly vaunted, anti-corrosive paint system provides a tough, five-layer barrier against corrosion. Stainless Steel components such as the drive, prop and shift shafts provide an additional layer of critical corrosion protection. And multiple sacrificial anodes throughout the motor provide protection from the elements.
Yamaha F90 Midrange Mechanical 20 Outboard Motor
| Manufacturer | Yamaha |
| Model | Yamaha F90 Midrange Mechanical 20 Outboard Motor |
| Model Code | Yamaha F90 Midrange Mechanical 20 |
| Color | Grey |
Yamaha F90 Midrange Mechanical 25 Outboard Motor
| Manufacturer | Yamaha |
| Model | Yamaha F90 Midrange Mechanical 25 Outboard Motor |
| Model Code | Yamaha F90 Midrange Mechanical 20-1 |
| Color | Grey |
YAMAHA IN-LINE 4 150 hp
$4,200.00 – $10,515.00
Yamaha Outboard Engine 200 HP
$7,805.00 – $15,610.00Convenience & Control
- MULTI-FUNCTION TILLER HANDLE: The F115 is compatible with Yamaha’s award winning Multi-Function Tiller Handle. It incorporates engine start/stop, emergency stop, gear shift, power trim and tilt operation, variable trolling switch, warning and controls all in one.
- CHARGING POWER: The F115 features three-phase alternators that produce up to 35 amps of power. For the 115, it’s more than 45 percent more charging power. That’s plenty of electrical power for battery charging and accessories, with more to spare.
- VARIABLE TROLLING: The F115 features Yamaha’s Variable Trolling RPM Switch (VTS®). This allows for precision adjustment of trolling speeds in 50-RPM increments, from 650 to 900 RPM for the 115 hp, and 550 to 1000 RPM for the 90 and 75 hp. It even allows for sub-idle trolling. This is a major plus for anglers.
- EXTENDED ENGINE LIFE: A Freshwater Flush Device allows you to flush the engine without starting it, for maximum convenience, durability and engine life.
Power & Performance
- POWER AND EFFICIENCY: Precision Multi-Point Electronic Fuel Injection delivers the exact amount of fuel needed for optimum performance and efficiency. Yamaha’s EFI optimizes fuel atomization further enhancing fuel economy.
- POWERFUL HOLE SHOT: The Composite Intake Manifold on the F115, F90 and F75 feature long tube intake tracks, tuned to increase airflow, which boost low-end and midrange torque. This means a more powerful hole shot and increased acceleration. Even with all this responsive power, an air silencer box and surge tank reduce air intake noise and air turbulence for smooth, quiet operation.
- OPTIMUM PERFORMANCE: A TCI microcomputer ignition adjusts timing to maintain optimal engine performance, economy and power under all operating conditions.
- LIGHTWEIGHT, COMPACT DESIGN: To keep weight down and efficiency up, the F115 has a double overhead camshaft, and the F90 and F75 feature a single overhead camshaft, but still deploy four valves per cylinder. That setup means less mass in the cylinder head and reduced weight for the overall outboard. At the same time, four valves per cylinder means great engine combustion, which contributes to horsepower, torque and fuel efficiency.
- QUICK ACCELERATION: The F90 and F75 have stepped up to 1.8-liter displacement, joining their F115 big bro. Meanwhile the 90 hp and 75 hp have both dropped 13 pounds. Lighter weight and increased volumetric efficiency, plus increased displacement equals thrilling performance and make our 90 hp a top performer in acceleration and torque.
Reliability & Durability
- KEEP THE WATER OUT: Updated cowling design incorporates the latest Water Draining Intake Duct. With side intakes and superior water separation function, this outboard is even better suited to take on the marine environment.
- MEASURABLY QUIETER THAN PREDECESSOR: Yamaha’s proven labyrinth exhaust system, which gradually expands exhaust gases through a labyrinth, greatly suppresses engine noise at low to medium speeds. Updates to the muffler have greatly reduced noise at higher than midrange speeds.
- ENGINE WARNING SYSTEM: This system protects the outboard with a range of functions including: overheat protection and low-oil-pressure warning (automatically reducing maximum RPM to 2000), over-rev protection, water-in-fuel detection, start-in-gear protection and shift-in prevention at open throttle.
- WET SUMP: The F115, F90 and F75 use a pressurized oil delivery system and incorporates a compact and durable oil pump to keep all of the moving parts of their DOHC and SOHC systems lubricated and running smoothly for maximum reliability.
- CORROSION PROTECTION: Combined with our proprietary alloy (YDC-30), our highly vaunted, anti-corrosive paint system provides a tough, five-layer barrier against corrosion. Stainless Steel components such as the drive, prop and shift shafts provide an additional layer of critical corrosion protection. And multiple sacrificial anodes throughout the motor provide protection from the elements.
Yamaha V6 4.2L 225HP – 25″ Shaft, 2022 Model
Yamaha V6 4.2L 225HP – 25″ Shaft shares the DNA of the flagship XTO, reflected in cutting-edge technology and Yamaha engineering excellence resulting in outstanding power and thrilling performance. By fusing power, efficiency and light weight, Yamaha’s innovative design sets the standard for V6 outboard performance.